i-Flash Technology Limited
Rm 1110, 11F, Fabrico Industrial
Buildings, 78 Kwai Cheung Road,
Kwai Chung, NT. Hong Kong
Web:
Tel:
Fax:
Email:
www.iflashtec.com
+852 2110 9587
+852 3585 5233
[email protected]
PULSE DS Mark II V Series Installation Guide
2 |
P a g e
Safety Instruction
These instructions are intended to assist users with the operation of the DSM2V and also to instruct on
how to avoid dangerous situations or damage to the device.
Warnings:
Serious injury or death may be caused if any of the warnings below are neglected.
Cautions:
Injury or damage to the equipment may occur if any of the following caution
messages are neglected.
Warnings
Follow these safeguards
to prevent serious injury or death.
Cautions
Follow these precautions
to prevent potential injury or material
damage.
Warnings:
Input voltage should meet both the SELV (Safety Extra Low Voltage) and
the Limited Power Source with DC 12V according to the IEC60950-1
standard. Please refer to the technical specifications for more details.
Do not use a third-party power adapter or power cord
When the device is installed on the wall or ceiling, make sure that it is
firmly attached.
