® Waves System
V 1.0 - 2014
I.D. AL - VideoPlayer VP200HDi - Video/Audio player - User manual
- 10 -
4 - Operating mode
See in annex at the end of this manual, the compatible files.
The name of the files and folders define the playback mode. The files and folders must be stored and
copied according to a specific organisation described below.
4.1 Organisation des dossiers :
Only ONE folder level is allowed at the root. The folder naming is composed of 3 digits (000 to 999)
followed by optional parameters and the name of your choice.
You should not use special or accentuated characters
.
Example :
001
003 [J002]
034 folder name
127 [SEQ][J001] my folder
Configuration folder: SYSTEM
SYSTEM folder is used for optional configuration files. See next chapter.
●
●
●
●
●
The first three digits represent the folder number and therefore its main name
Folders are numbered from 000 to 999.
Example :
000 : Folder N°000 - "Autoplay" folder which is automatically played when the device is powered on.
001 : Folder N° 1 - Triggerable by the contact input 1
034 : Folder N° 34
The folder number is used identifies the folder to use during a jump or an input triggering. You can use
any number between 000 & 999.
IMPORTANT :
The trigger contact input select folder to be played
See at the end of chapter 4 the details of the use.
Special case:
Folder 000 is the folder which will be played by default when powering on. When
powering on, presence of this folder is checked ; if it is present, the player plays files of this folder.
If this folder is missing, the player turns in wait mode (black screen) or play the «waitscreen.jpg» file.
Additional Parameters - Optional Tags:
To modify the conduct of the player, you can add optional parameters within the folder name. These
parameters are boxed with the symbols "[" "]". You can add several parameters within the folder
name.
[Jxxx]
- Jump to another folder after reading the current folder.
[RET]
- Returns to the previous folder after reading the current folder.
[RND]
ou
[SEQ]
- Specifies random or sequential playback mode for the current folder.
[Vxx]
- Controls the volume level of the folder
[NT]
- Define interruption modes
[RESxxxxxxxx]
et
[REExxxxxxxx]
- Active or deactive the outputs contacts (when start or at the end)
[RSSxxx]
et
[RSExxx]
- Sending of RS232 codes at the begining or at the end of the folder
Note: If no optional parameter has been indicated, the player reads in sequential the folder in full and
then stops. The folder can be interupted
