® Waves System
V 1.0 - 2013
I.D. AL - VideoPlayer VP200HD - Video/Audio player - User manual
- 10 -
●
●
●
●
●
[Vxx] - Volume setting
The name of the folder have an effect on the output volume. This function is used to broadcast
messages loud more or less than others files.
Exemple :
001 [V05] : Volume is set at 5 from 32 step (00 to 31)
001 [V31] : Volume is set at 31, maximum value
001 [V00] : Volume is set at 00, minimum value (Mute)
- If the variation of values exceeds the minimum or maximum values of the player, the levels are settled
to their maximum or minimum.
- If the volume level is set to its maximum or minimum, the instruction is ignored.
●
●
●
●
●
[NT]
-
This option defines the interruption mode of the folder currently read.
If this options is registered within the name of the folder, the read file cannot be interrupted and
instructions received are ignored.
Without this option, the reading of the currently read directory can be interrupted any
time by an external action. (input, RS232 ...)
Example:
001 [NT] - The folder can NOT be interrupted.
In that case, an action on one of the input contacts through RS232 or other is ignored and the reading
of the current file is not stopped.
Caution! The action is not memorised and the triggering information is lost.
●
●
●
●
●
[RSSxxx] ou [RSExxx] –
These tags allows to send bytes onto the RS232 output.
When the folder is called, a list of bytes is transferred by the serial link in order to control other devices
(another player, switching grid, projector, ..) The bytes to send are included in a text file that will be
especially created for. Value by default : 19200 Bauds - 8 bits – no parity – 1 bit start – 1 bit stop
The file definition of the bytes to send must be named : serial.txt
This file will be copied in the SYSTEM folder of the media (memory card/flash drive)
[RSSxxx]: xxx appoint the number of the line of the file serial.txt that must be sent (value from 001 up
to 999) when player starts to play the folder
[RSExxx] : xxx appoint the number of the line of the file serial.txt that must be sent (value from 001 up
to 999) at the end of the folder
The «serial.txt» file is a text file (raw text without page setting ) that can be created with any easy text
editor like « notepad « from windows or similar. When recording, use «ANSI» coding . Do not use
special characters.
The file «serial.txt» of RS232 codes is a text file containing one or several lines. Each of these lines
will include a sequence of bytes expressed in hexadecimal and separated by a space ( from 00h to
FFh). You must only indicate the two characters of the wished hexadecimal value.
