® Waves System - La Ville en Bois - 44830 BOUAYE - FRANCE - Tel : +33 (0) 2 40 78 22 44 - www.id-al.com - V1.0/2007
I . D . A L - M i c r
I . D . A L - M i c r
I . D . A L - M i c r
I . D . A L - M i c r
I . D . A L - M i c r o P l a y e r - I n t e r a c t i v e M P 3 P l a y e r - Q u i c k s t a r
o P l a y e r - I n t e r a c t i v e M P 3 P l a y e r - Q u i c k s t a r
o P l a y e r - I n t e r a c t i v e M P 3 P l a y e r - Q u i c k s t a r
o P l a y e r - I n t e r a c t i v e M P 3 P l a y e r - Q u i c k s t a r
o P l a y e r - I n t e r a c t i v e M P 3 P l a y e r - Q u i c k s t a r t g u i d e
t g u i d e
t g u i d e
t g u i d e
t g u i d e
MicroPlayer -
Quick start guide
4 - Configuration file - config.txt
Some functions of the MicroPlayer can only be fully defined by a configuration file.
- Create the configuration text file using any text editor (Notepad, Wordpad...) - Format is #PARAMETER:xxx as follows
- Name the file: config.txt
- Copy config.txt into the SD card, at the root
Note: if the configuration file is not present at the root of the SD card, default factory settings will be applied.
If the line of a parameter is missing, the default value of this parameter will be used.
#ID:xxx
Player IDENTIFICATION - xxx number between 001 and 127 -
Default 001allocated to player 001
#VOLUME:xx
Setting of VOLUME - xx = any value between 00 and 31 -
Default value = 16
#BASS:xxx
Setting of BASS - xxx = any value between -12 and +12 -
Default value = 00 no correction
#TREBLE:xxx
Setting of TREBLE - xxx = any value between -12 and +12 -
Default value = 00 no correction
#POWER:x
LOW POWER mode - x = value 0 or 1
0 = Mode without low power mode management -
Default mode
1 = Low power mode management
#RS_MONITORING:x
RS232 serial link mode x = value 0, 1 or 2
0 = Mode «Daisy chain» -
Default mode
1 = Mode «Surveillance»
2 = Mode «Surveillance extended»
#AUTOPLAY:x
Autoplay on powering on - x = value 0 or 1
0 = Mode «Autoplay» not activated
1 = Mode «Autoplay» activated -
Default mode
#BOOT:xxx
Directory to be played on powering on - xxx any number between 000 and 999
Default value = 000
When using an Infrared remote control, keys of the handset can be associated to functions of the player, using the following
commands in the configuration file :
#IR_PLAY:xx
Allocate key xx to function Play / xx = any value between 00 and 15
#IR_STOP:xx
Allocate key xx to function Stop / xx = any value between 00 and 15
#IR_NEXT:xx
Allocate key xx to function Next File / xx = any value between 00 and 15
#IR_PREV:xx
Allocate key xx to function Previous File / xx = any value between 00 and 15
#IR_VOLUP:xx
Allocate key xx to function / xx = any value between 00 and 15
#IR_VOLDN:xx
Allocate key xx to function Volume - / xx = any value between 00 and 15
#IR_DIR:yyy:xx
Allocate key xx to function Jump to directory yyy / yyy = value between 000 and 999 / xx = value between 00 and 15
Example of configuration file :
#ID:005
Player number 005
#POWER:1
Low power mode
#BOOT:012
Read directory 012 on powering on
#AUTOPLAY:1
Autoplay on - start reading on powering on
#RS_MONITORING:1
Serial link set in «surveillance» mode
#VOLUME:15
Volume level set at 15 on powering on
#BASS:+06
Bass red06dB
#TREBLE:-03
Treble increase -03dB
#IR_PLAY:02
On the infrared remote press key 02 to Play
#IR_STOP:03
On the infrared remote press key 03 to Stop
#IR_NEXT:01
On the infrared remote press key 01 to play Next File
#IR_PREV:04
On the infrared remote press key 04 to play Previous File
#IR_VOLUP:10
On the infrared remote press key 10 to adjust Volume Up
#IR_VOLDN:11
On the infrared remote press key 11 to adjust Volume Down
#IR_DIR:145:06
On the infrared remote press key 06 to play directory 145
