® Waves System
V 1.3 - 2018
I.D. AL - MicroPlayer mkIII - Wav MP3 Audio player - User manual
3 - INSTALLATION
6 - Power of the supply of the player
7 - USB host for flash drive
8 - Serial link RS 232
9 - Inputs on dry contact
10 - Outputs on Mosfet
11 - Line level audio ouput
12 - Amplified outputs for speakers
13 - Headphone audio output
- 5 -
First use:
MicroPlayer mkIII is factory setting configured with parameters by default and the player must
operate on inserting a prepared media dedicated to ( chapter 4 ).
Warning, before plug a SD/SDHC memory card or a USB flash memory, it is absolutely necessary to
power off the player.
1 - Prepare and insert a quality SD/SDHC memory card or a USB flash memory.
1 - Amplifier volume
2 - General volume ( configurable buttons)
3 - SD/SDHC memory card slot
4 - Infrared sensor
5 - Activity led
Memory card:
Choose a quality SD/SDHC, insert it in its slot till the stop without overdo. To remove,
gently push on the memory card to unlock it.
USB connector:
You can connect a USB flash drive
Note: If a SD/SDHC card and a USB flash drive are both connected, the SD/SDHC card will have priority
and the USB stick will not be used
1
2
3
4
5
6
7
8
9
10
11
12
13
OR
SD/SDHC
USB flash memory
