® Waves System
V 1.0 - 2011
I.D. AL - MicroAMP4 - Audio amplifier for headphones - Manual
- 2 -
This equipment, manufactured by Waves System, has been so designed that any danger is virtually
excluded provided it is used according to its purpose. However, for safety reasons, we are obliged to
point out the following measures:
• When operating this appliance, observe all local rules and enforced regulations!
The homologation shall be invalid if any modification or alteration is made on the appliance. Operating
modified appliances may lead to a penal suit. In the interest of the safety of work, the manager and the
operator will be responsible for respecting the instructions.
• Retain all packing material in case the device must be shipped. Take care that it does not fall into the
hands of children. Only the original packing guarantees optimal safety of the appliance during transport.
Should it be necessary to ship the product during the guarantee period, Waves System will not accept
claims for damage arising during the transport from using incorrect packing material!
• This product is dedicated to broadcasting music. It may only be operated by trained or knowledgeable
personnel who can handle the device correctly.
• Before every use, the operator must check the functional safety and the condition of the appliance.
• The operator must be knowledgeable in the operation of the appliance.
• This device must not be used in places with potential explosion risk. Moreover, it must not be used in an
environment favouring combustion neither in a wet or excessively hot or cold place.
A.5 Safety instructions against risks pertaining to electrical current
• The appliance must be connected to a grounded AC power outlet or a correctly wired CEE AC outlet.
• Before connecting the appliance, verify that the power supply voltage and frequency match the
specifications indicated on the appliance.
• Before powering, check that the appliance and the cables are not damaged. Damaged cables and
connections must be immediately replaced.
• Never leave power cords enter in contact with other cables! Handle the power cord and all the cables
connected to a power supply with extreme care.
• Always connect the power supply last. Check that the power switch is ´off’ before connecting the
appliance to mains supply. The mains outlet must be accessible after installation.
• Check the appliance and its power cord from time to time.
Unplug the power supply if you don’t use the appliance anymore or for maintenance.
• Always grasp only the plug on the power supply cord. Never pull the cable to unplug.
• Power supply, repairs and maintenance must be done by qualified personnel.
• Do not switch the appliance on and off in short intervals, as this may reduce its life.
