COBALT Pro
™
Wall Sensor Retrofit Kit for
Concealed Flush Valve Installation Instructions
I-CON Systems, Inc., for product support call 1-866-730-7192 or visit us online at support.i-con.com
One or more products contained herein are protected by U.S. Patent with other undergoing the patent process www.i-con.com/patents
Part No. 101674
page 3
Rev 080323
ProLAST
®
T-SEAL & FLUSH VALVE CAP
ASSEMBLY INSTALLATION
Step 1
Insert ProLAST® T-Seal into flush valve body.
Step 2
Place square-profile O-ring into groove on bottom of flush valve
cap assembly. Place flush valve cap assembly onto flush valve
body.
Step 3
Tighten locking ring by hand to flush valve body.
WALL SENSOR INSTALLATION - INSTALLATION
WITH ELECTRICAL BOX
Step 1
Loosen set screw on plate. Remove cover by pulling out, then up.
Step 2
Feed control module cable through junction box knock-out.
Attach control module to junction box with provided screws.
