1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A-7034W-1EX-
q
Printed in Japan
© 2012–2016 Icom Inc.
PANEL DESCRIPTION
TO USE RC-28
Rear
view
q
w
e
r
t
y
u
q
Make sure Windows has completed its start-up.
w
Connect the RC-28 to the PC that has RS-BA1 1.30
or later version installed on it.
USB cable (supplied)
RC-28
PC
to
［
USB
］
port
•
DO NOT connect the RC-28 using a third party’s
USB cable or any USB hub. The RC-28 may not
work properly.
• The RC-28 cannot be used with RS-BA1 1.20 or
earlier versions. Please download the latest ver-
sion from the Icom website, and install it.
http://www.icom.co.jp/world/index.html
When first connecting the RC-28 to the PC, wait until
“Device driver software installed successfully.” is dis-
played.
e
Start up the RS-BA1 Remote control software.
• The [LINK] LED lights green. (See ‘PANEL DESCRIP-
TION’
e
.)
r
Now you can control assigned functions of the RS-
BA1 using the RC-28.
❍
If the [LINK] LED does not light, check the following.
z
Click the [Option] menu on the RS-BA1’s Top menu,
and then click “USB Dial...” to open the USB Dial
Setting screen.
When the “USB dial...” item on the [Option] menu
is not displayed, download the latest software from
the Icom website, and install it.
http://www.icom.co.jp/world/index.html
x
If the “Select Device” item is set to “Not Use,” set it to
the RC-28’s serial number.
(example: RC-28 02XXXXX)
[USB] port
Connect to a PC through the supplied USB cable.
[TRANSMIT] LED
Lights red while transmitting.
[LINK] LED
Lights green when the RC-28 can be used with the RS-BA1.
Main dial
Rotate to change the operating frequency.
[F-1]/[F-2] LEDs
Each LED lights orange when the assigned function is
activated. The functions are assigned by the RS-BA1.
If the LED function is set to OFF, the LED will not light, even if
the assigned function is ON.
[F-1]/[F-2] buttons
Push or Hold down to activate the assigned function, depending
on which action is assigned to the function by the RS-BA1.
[TRANSMIT] button
Push to toggle between transmit and receive.
You can change the Transmit action in the RS-BA1's [Option]
menu. (Option > USB Dial
...
> TRANSMIT Button)
•
Hold down [TRANSMIT] to transmit, release to receive.
RC-28 02XXXXX
Icom, Icom Inc. and the Icom logo are registered trade-
marks of Icom Incorporated (Japan) in Japan, the United
States, United Kingdom, Germany, France, Spain, Russia
and/or other countries.
