background image

LIMITED WARRANTY TERMS & CONDITIONS: 

Sleep Systems warrants the IC333 Height Adjustable Bed and parts to the Customer against         
defective materials and defective workmanship, from date of invoice. 
 

Steel Frame of Bed - 10 Year Limited Warranty 

 

Actuators - 5 Year Limited Warranty   

 

Hand Piece - 2 Year Limited Warranty 

 

Control Box - 5 Year Limited Warranty 

 

Upholstered Surround and Fabric - 3 Year Limited Warranty 

 

Castor wheels - 5 Year Limited Warranty 

 
Any warranty does not apply in circumstances where: 
a. The goods or services are not defective; 
b. The goods were used or services required for a purpose other than which they are intended; 
c. The goods were repaired, modified or altered by any person other than Sleep Systems; 
d. The defect has arisen due to misuse, neglect or accident; 
e. The defect has arisen due to the incorrect installation of the goods; 
f.  The goods have not been stored or maintained as recommended by Sleep Systems or agents; 
g. The defect has arisen due to normal; wear and tear on the goods; or 
h. The Customer is in breach of the conditions

.  

 

In order to make claim under this warranty, a person must: 

a. Provide written details/pictures of any defect in the products together with documentary proof 

of the date of purchase of the product within 30 days of identifying the defect; 

b. Allow Sleep Systems or its employees or agents to inspect the products; 

c. Provide any information requested by Sleep Systems in relation to the products or installation of 

the products. 

Where Sleep Systems supplied goods via a third party, the third party’s warranty is the only         
warranty provided to the Customer. 

Sleep Systems will use its best endeavours to meet any estimated dates but will in no circumstances 
whatsoever be liable for any loss or damage suffered by the customer or third party for failure to 
meet any estimated date. 

The warranty is personal to the purchaser and is not able to transferred or assigned.

 

Summary of Contents for IC333











Reviews: