I-Cane Mobilo User Guide
Page 16
9.
Switch on and Off the obstacle warning in de I-Cane App Go.
9.1 When the Mobilo switches on/off, the obstacle warning is switched
on/off.
9.2 While using the navigation program Go, the obstacle warning can
be switched on/off in the App.
9.3
Choose for ‘My Configuration’ on the home page of the App.
9.4
Select ‘OA Setup’.
9.5 Choose Obstacle Avoidance On/Off. A beep confirms the switch.
9.6 Control the function by turning the Mobilo downwards.
10. Using routes from the Route List
10.1 Chose Play Route on the home page of the App.
10.2 Select the desired route and wait for the report that the GPS signal
is good enough to start walking. If you are inside, please go outside
for a better GPS signal.
10.3 If you are not nearby the starting point of the recorded route, you
will hear so. Move towards the starting point and start the route
again.
10.4 If the GPS signal is good, you will hear and feel the command to
start walking. The tactile arrow is commanding to ‘Go Straight’.
10.5 Start walking means always to follow the road, sidewalk of
footpath. Walking in the wrong direction will cause the off route
modus which will tell you to go back.
10.6 Along the route, the program will limit the instructions to the
recorded decision points.
These decision Points always refer to point where different
directions can be taken. Tactile Arrow and spoken commands will
make you aware of that.
10.7 If the tactile arrow stays on 12.00 h, the direction is always straight.
Do not take this too literal. The tactile arrow does not correct for
little deviations without multiple directions. By this, please focus on
following the chosen road, sidewalk or footpath. The program will
become active at the next decision point.
