
17
7.
Linking the I-Cane Mobilo® with the I-Cane Go® (App)
Before the I-Cane Mobilo® can carry out instructions from the I-Cane Go®, a
one-time connection should be carried out between the handle and the I-Cane
Go® (App). Please follow the next procedure:
7.1
Switch on the I-Cane Mobilo® , see 1.11.
7.2
Open the I-Cane Go® program on your smartphone, see 4.4.
7.3
On the homepage of the I-Cane Go® (App), choose MY SETTINGS.
7.4
Then choose HANDLE PAIR.
7.5
The program audibly searches for your Mobilo . If your I-Cane Mobilo®
is found , you will be notified. Also a audible notification is given when no
Mobilo is found.
7.6
Choose the device that was found by confirming the Mobilo
Identification Code offered.
7.7
If the connection has been successfully established, this will be reported
and the I-Cane Mobilo® is ready for use. Then choose the BACK button
7.8
This connection is maintained as long as the I-Cane Mobilo® and I-Cane
Go® (smartphone) are switched on and stay close to each other. If this
mutual distance exceeds 5 to 10 meters, the connection will be broken.
7.9
A subsequent connection is established automatically when the I-Cane
Mobilo® and I-Cane Go® are turned on. The order of activation is not
important. The program then always reports that the I-Cane Mobilo® is
ready for use.
8.
Switching the obstacle function on and off in the I-Cane Go®
8.1
The obstacle warning switches on and off automatically with the
switching on and off of the I-Cane Mobilo® .
8.2
When using the navigation program I-Cane Go® this function can also be
turned off and on again without turning off the I-Cane Mobilo®.
8.3
Select MY SETTINGS on the homepage .
8.4
Select SET OBSTACLE WARNING.
8.5
Choose OBSTECLE WARNING ON / OFF.
8.6
Check the switching on and off by BY moving a hand in front of the
sensor (see also 2.9).