I.C.E JURASSIC PARK ARCADE, Setup Manual

Page: 4 / 19

4
¼
·20 x 1
½
” Allen
AA6281
AA6212
Install one AA6281 Allen bolt and AA6212 washer at each side of
the backside of the cabinet. See circle diagrams for locations.
Make sure the alignment of the side panels of the cabinet are
straight, then tighten the two at front and two at back mounting
bolts.
Locate the DVI and AC Power cord at the bottom of the cabinet.
Attach the video DVI cable to VIDEO DVI and the AC power cord
to AC IN on the monitor.
Then connect the upper cabinet harness shown below.
Re - install the back door panel. Use AA6220 bolts and AA6212 washers you
removed previously.