Hyundai WS870W, Instruction Manual

Page: 11 / 20

EN - 11
EN
3.2 NORMAL STATES
Click”MODE”to switch alarm time and current time
Hold “MODE” for 2 seconds to enter into setting
Click”MAX/MIN” to switch MAX/MIN Hygro-thermometer
Hold”MAX/MIN”for 2seconds to clear MAX/MIN Hygro-thermometer
Click “Up” to switch 12hr/24hr
Click “Down” to switch °C/°F
Hold”Down”for 2 seconds enter into/exit RCC
When ALARM rings, click “snooze” to enter into the snooze state every 5 minutes
3.3 TIME SET
Click”MODE” to switch current mode to time mode,the sequence of time setting: time mode

alarm mode

time mode….
Under time mode,hold “mode” key for 2 seconds to enter into time setting
The sequence of time setting: Time zone

Hour

Minute

Year (2000-2099)

Month

Date

Language

Exit
There will have 1Hz flashing during setting
Press “MODE” to confirm the setting, and enter the next setting state
Press “Up” one time, the setting will go ahead for one step; hold the key for 2 seconds, it will
run forward by 8 steps/second.
Press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run
back by 8 steps/second.
The system will exit automatically if no key is operated in 30 seconds.
3.4 ALARM SET
Click”MODE” to switch time mode to alarm mode
Hold “MODE” key for 2 second to enter into alarm setting
The sequence of alarm setting: Hour

Minute

SNZ interval setting(1-20minutes,default
5minutes)

exit
There will have 1Hz flashing during setting
Press “MODE” to confirm the setting, and enter the next setting state
Press “Up” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it
will run forward by 8 steps/seconds.
Press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run
back by 8 steps/second.
The system will exit automatically if no key is operated in 30 seconds.
IV. fUNCTION AND EffECT
4.1 THE fUNCTION Of RCC RECEIVING
1) Conditions of entering RCC receiving status:
a) Power on or reset to enter RCC receiving status
b) Entering RCC receiving status at1:00, 2:00,3:00,4:00,5:00 automatically
c) Press “DOWN” for 2 seconds to enter RCC receiving status forcedly
2) The time for RCC receiving is 7 minutes
3) The displaying of icons during receiving:
a) When it enters RCC receiving status, the tower-shaped part of RCC symbol on the LCD
will flash in the frequency of 1 Hz.
b) When it is receiving the signal, the tower-shaped part of RCC symbol will be still, while
the symbol of RCC will flash in the frequency of 1 Hz.
1)
2)
3)
4)
5)
6)
7)
8)
1)
2)
3)
4)
5)
6)
7)
8)
1)
2)
3)
4)
5)
6)
7)
8)