Hyundai WS SENZOR 2094, User Manual, Page: 8 / 20

Dear customer, thank you for purchase of our product. To achieve the utmost in enjoyment and
performance, please read this manual carefully before attempting to operate the unit in order to
became familiar with its features, and assure you years of faithful, trouble free performance.
Important Notes
- Keep instructions the safety and operating instructions should be retained for future refer
ence.
- Ensure you read the safety warnings carefully below before you operate the unit.
- When the unit distorts because of strong smoke and heat, remove the batteries and cut
off the power supply quickly.
- When the set is not going to be used for a long time, unplug the DC lead and remove the
batteries.
- Clean the cabinet with soft cloth. Detergent or alcohol is forbidden.
- Don’t attempt to disassemble or repair this unit casually. Go to consult the properly quali-
fied center when malfunction happened.
- Avoid installing the unit in locations described below:
- Places exposed to direct sunlight or close to heat radiating appliances such as
electric heaters.
- On top of other stereo equipment that radiate too much heat.
- Places locking ventilation or dusty places.
- Places subjected to constant vibration.
- Humid or moist places.
- Operate turning controls and switches as instructed in the manual.
- This book is only a guide for user’s operation, not a criterion for configuration.
Features:
- 433MHz RF Transmitting frequency.
- Transmission range: 30 meters ( open area ).
- Measurable range: temperature -20°C ~ +60°C
- Battery: DC 1.5 V AAA size x 2 pcs
- Size: 90 x 63 x 22 mm
- Weight (netto): 80 g
Registration to receiver Procedure:
- Insert the batteries in the Thermo Sensor Unit (Battery compartment of thermo sensor is
located behind the back cover, unscrews to open.)
- Press “C / F” button to select Temperature to be displayed in Celsius mode or Fahrenheit
mode.
- For having more than one Rempte Sensor (Maximum3), select the Channel, CH1, CH2 or
CH3 to ensure each sensor is transmitting at difference channel before inserting batteries.
The Channel select switch is at the back of the sensor unit.
- Press “ TX “ button on the thermo sensor unit to transmit temperature to the receiver unit
manually.
Low batteries indicator:
- Low battery icon “ “ appear on receiver display in particular channel indicating . Please
replace new batteries.
Note:
- Avoid placing the remote sensor near interference sources/metal frames such as computer or
TV sets.
ENG - 8