EN
EN - 25
2.2 Part B – Buttons
B1: “MODE/SET “button
B2: “SNOOZE/LIGHT” button
B3: “MEMORY” button
B4: “▲/AL ON/OFF” button
B5: “▼/ SEARCH” button
B6: “WAVE” button
B7: “ALERT” button
B8: “RESET” button
2.3 Part C – Structure
C1: Wall Mount Hole
C2: Battery Compartment
C3: Stand
3. OUTDOOR THERMO SENSOR
D1: Transmission Indication LED
D2: Wall Mount Hole
D3: Battery Compartment
D4: “RESET” button
D5: Cable Probe
D6: Stand
4.GETTING STARTED
4.1 Main Unit:
• Open main unit battery compartment cover [C2].
• Insert 3x AAA batteries observing polarity [ “+” and “ –“ marks].
• Replace main unit battery compartment cover.
• Use a pin to press the RESET [B8] button on the rear of the main unit, the main unit is now
ready for use.
4.2 Outdoor Thermo Sensor
• Batteries compartment (D4) of thermo sensor is locating behind the back cover.
• Insert 2 x AAA batteries observing polarity [ “+” and “–“ marks].
5. INSTALLATION
5.1 Main Unit
The main unit can be placed onto any flat surface (C3) or wall mounted by the hanging hole (C1)
at the back of the unit.