EN - 26
8. PRECAUTIONS
• Use a pin to press the reset button (B3) if the unit does not work properly.
• Avoid placing the clock near interference sources/metal frames such as computer or TV sets.
• Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas.
• The outdoor sensor must not be set up and installed under water. Set it up in away direct
sunlight and Rain.
• Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning
agents may scratch plastic parts and corrode electronic circuits.
9. SPECIfICATIONS
Indoor Data:
Temperature range:
-9.9 to 50 °C [+14.2 to +122 °F]
Temperature Units Measured:
°C or °F [switch able]
Humidity Range:
20 % to 95 %
Outdoor Data:
Transmission distance: (open area)
30 m @ 433 MHz
Temperature range:
-20 ~ 50 °C [-4 ~ +122 °F]
Humidity Range:
20 % to 99 %
Mount:
wall / table
Main Unit Dimensions:
W 136 x H 82 x D 17 mm
Thermo Sensor Dimensions:
W 62 x H 101 x D 24 mm
Main Unit weight (NET):
102 g
Thermo Sensor weight (NET):
66 g
Battery Requirements:
Base Station [indoor]:
2 x AAA batteries
Sensors [outdoor]:
2 x AAA batteries
wE RESERVE THE RIGHT TO CHANGE TECHNICAL SPECIfICATIONS
.
Summary of Contents for WS 2215
Page 43: ...Pozn mky Notatka Notes Megjegyz s...
Page 44: ......
