![background image](http://html1.mh-extra.com/html/hyundai/vin12a/vin12a_instruction-manual_2197750036.webp)
ENG - 36
HYUVIN32DZ
1. POWER CORD
8. WATER TRAY
2. FOOT
9. DOOR LINER
3. DOOR FRAME
10. DOOR SEAL
4. GLASS DOOR
11. ISOLATED OARD
5. RECESSED HANDLE
12. COLD FAN MASK
6. TOP DOOR HINGE COVER
13. SHELF
7. BOTTOM DOOR HINGE
14. LAMP COVER
BEFORE PUTTING INTO USE
• Clean the appliance, and be thorough, especially in the interior (See HOW TO CLEAN).
• In case the interior accessories are not correctly placed, rearrange them as described in
chapter NAME OF THE PARTS.
HOW TO INSTALL
• Install refrigerator in a convenient location away from extreme heat and cold. Allow sufficient
clearance between the refrigerator and side wall so the door will open without obstruction.
Refrigerator is not designed for recessed installation.
• Select a space with strong level floor.
• Allow 2 inches (5cm) of space between the refrigerators side & wall and 4 inches (10cm)
between back & the wall.
INSTRUCTIONS FOR USE
Setting The Temperature Control
The temperature inside the wine cooler is dependant on the ambient temperature (room temp.)
outside the wine cooler. Cooling temperature can be in range from 12 ~ 18 °C (for VIN18DZ and
32DZ temperature range are 12-18 °C upper zone, 8 - 18 °C lower zone).
Ideal temperature for red wine storage is 14 ~ 16°C. White wine is best when served cooled to
12°C.
Set the required temperature with the buttons on the temperature controller.
During setting the chosen temperature will flash on the LED display.