DRIVING
VELOSTER N
32
31
HYUNDAI
ELECTRONIC STABILITY CONTROL (ESC)
REV MATCH
The ESC system is an electronic
system designed to help the driver
maintain vehicle control under
adverse conditions.
Press to turn ESC on or off.
REV
The Rev Matching system
automatically helps synchronize
engine rpm with the optimal speed
of the gear about to be engaged
which reduces the impact of clutch
connection and improves gear shift
response.
1. Press REV button (ON/OFF)
• Press the REV button to turn on the system. A message appears
“Rev Matching On” with a REV indicator on the cluster LCD display.
• Press the REV button again to turn off the system. A message
appears “Rev Matching Off” and the REV indicator disappears.
REV
N
SHIFT LIGHT
N
The number of LEDs illuminated indicates the relevant engine speed
Different colored LEDs will be illuminated as engine speed nears the
maximum allowed speed. When all 5 LEDs start blinking, it indicates
the best time to initiate upshift operation.
You may select in which mode to display the gear shift indicator in the
User Settings mode.
Go to ‘User Settings → Convenience → Shift Lights → ECO/NORMAL/
SPORT/N/CUSTOM’.
Each gear and drive mode has different LED operation range. In
SPORT mode and N mode, LED operation is broader than NORMAL
mode and ECO mode to further support the driver under sporty or
track driving conditions.
BLIND-SPOT COLLISION-AVOIDANCE ASSIST (BCA)
The Blind-Spot Collision-
Avoidance Assist (BCA) system
may apply braking power, when
an approaching vehicle is detected
within a certain distance next to or
behind your vehicle. The
instrument cluster will inform the
driver of activation. Press the Blind-
Spot switch. The indicator will
illuminate on the button. If vehicle
speed exceeds 40mph the system
will activate. Press the switch again
to deactivate the system.
Blind spot collision warning (BCW)
Warning range is dependent on your vehicle speed. Example, if
your vehicle speed is 20 mph greater than other vehicles, the
warning is not active.
Blind spot collision avoidance (BCA)
When changing lanes, the system detects the front lane through
the camera installed on the windshield and detects the side/rear
areas through radar sensors.
_
+