Hyundai VELOSTER 2019 Manual Download

Page: 43 / 106

3-43

Con

enient f

atur

es of y

our v

ehicle

Electronic Stability
Control (ESC) Indicator
Light

This indicator light illuminates:

• When you place the ignition switch

to the ON position.
- The Electronic Stability Control

indicator light illuminates for
about 3 seconds and then goes
off.

• Whenever there is a malfunction

with the ESC system.
If this occurs, have the vehicle
inspected by an authorized
HYUNDAI dealer.

This indicator light blinks:

• While the ESC is operating.

For more details,

refer to

"Electronic Stability Control (ESC)"
in chapter 5.

Electronic Stability
Control (ESC) OFF
Indicator Light

This indicator light illuminates:

• When you place the ignition switch

to the ON position.
- It illuminates for approximately

3 seconds and then goes off.

• When you deactivate the ESC sys-

tem by pressing the ESC OFF but-
ton.

For more details,

refer to

"Electronic Stability Control (ESC)"
in chapter 5.

ECS SPORT Indicator
Light

This indicator light illuminates:

• When ESC SPORT is activated.

For more details, refer to “Electronic
Stability Control” in chapter 5.

(6&

63257

Summary of Contents for VELOSTER 2019











































































































Search results

Summary of Contents for VELOSTER 2019

Reviews:

Related manuals for VELOSTER 2019

Brands by name

Popular brands

Hyundai VELOSTER 2019, Manual

Search results

Summary of Contents for VELOSTER 2019

Reviews:

Related manuals for VELOSTER 2019

Brands by name

Popular brands