features and controls
VELOSTER
29
28
Hyundai
NOTE
- EcoShift Dual Clutch Transmission characteristics
The new technology of the ECOShift Dual Clutch Transmission
is different than a traditional automatic or manual transmission:
- The EcoShift Dual Clutch Transmission is an automatically
shifting manual transmission.
- EcoShift Dual Clutch Transmission utilizes two clutches connected
to a computer-controlled manual gearbox. It provides the
convenience of a transmission that shifts automatically, with the
efficiency of a manual transmission.
- When you turn the ignition on and off, you may hear clicking
sounds as the transmission solenoids turn on and off, cycling
through a self test. This is a normal sound for the EcoShift Dual
Clutch Transmission.
- When you stop on a hill, if you remove your foot from the brake
pedal, the vehicle will remain stationary for approximately two
seconds to prevent the vehicle from rolling backwards. If you
depress the accelerator pedal during the two second interval, the
vehicle will accelerate. If you wait more than two seconds, the
vehicle will enter creep mode and may roll backwards if the
hill is steep.
Caution
- You should always use the foot brake to hold the car on a hill until
you are ready to drive. Using creep mode to hold the car on a hill
may damage the clutch.
- An overload of the clutch is indicated by a shudder or vibration
and a blinking warning light. To prevent clutch damage, the clutch
will release. If the clutch is released, apply the foot brake and wait
a few of minutes before driving. Ignoring these warnings and wait
time can lead to transmission damage.
SHIF
T
EC
O
DUA
L CLUTCH
Sport Mode
Shift lever from D to DS to activate Sport mode.
Sport mode is a recalibrated automatic mode
that will hold gears longer and downshift at
higher RPM for a more dynamic driving style.
If you use the paddle shifters (or [+] or [-])
to enter the Shiftronic mode, you will stay in
Shiftronic mode until the shift lever is returned
to Drive, giving you full manual control.
Shifting into Reverse
1. Fully depress the clutch
A
2. Shift into Neutral
B
3. Pull the Shift Lever Knob
C
4. Shift into Reverse
D
A
C
B
D
Manual Transmission
Rearview display
rearview camera
The rearview camera
will activate when the
ignition switch is ON
and the shift lever is in
the R (Reverse) position.
ENGINE
START
STOP
