Hyundai VC 007, Instruction Manual, Page: 24 / 44

III. VACUUM CLEANER PREPARATION
Remove all packing material, take out the vacuum cleaner and the accessories.
Remove all possible adhesion foils, stick-on labels or paper from the appliance.
VACUUM CLEANER ASSEMBLY
When assembling the vacuum cleaner, follow the procedure indicated in Fig. 1.
Choose appropriate accessories as required ( B 1 - B4 ) (Fig. 4). The telescopic suction tube
C8 can be set to an optimum length to suit the user´s height.
Note
When the plastic fixture A12 with the dust bag A13 is properly fitted in the suction
compartment of the vacuum cleaner, the mechanical safety lock is released and the
vacuum cleaner cover can be closed.
IV. USE OF VACUUM CLEANER
Before use, unwind (by pulling) the power cable A10 from the vacuum cleaner
to a required length and plug the vacuum cleaner to the mains.
CONTROL
A1 button - vacuum cleaner ON/OFF switch
A2 button - when pressed and held, the unwound part of the power cable rewinds
back inside
Knob A3 - by turning it to the right, you increase the suction power
- by turning it to the left, you reduce the suction power
V . REPLACEMENT OF THE DUSTBAG AND FILTERS
Caution
– Maximum suction performance can be achieved when the filters are clean and the
dustbag is empty.
– When you have replaced the dustbag about five times, the filters need to be cleaned,
or replaced.
– When you are vacuuming very fine dust, the dustbag and filter pores might get clogged.
This reduces the air flow and deteriorates the suction performance.
In such a case, the dustbag needs to be replaced as soon as possible (even though
it might not be full yet) and the filters must be cleaned or replaced.
– Used dustbags and filters are to be disposed of with regular household waste.
DUSTBAG REPLACEMENT
Full bag indicator
If the A9 indicator is permanently coloured, the dustbag needs to be replaced. If the
indicator
A9
is activated occasionally when you are vacuuming, you can ignore it.
To remove the dustbag, follow the procedure indicated in Fig. 2. To fit a new dustbag
in the vacuum cleaner, proceed in reverse order.
INPUT FILTER REPLACEMENT
To remove the input filter, follow the procedure indicated in Fig. 2. To fit a new input filter
in the vacuum cleaner, proceed in reverse order. A used filter is to be disposed of with
regular household waste.
24 / 39