![background image](http://html.mh-extra.com/html/hyundai/um-168/um-168_instruction-manual_2196415041.webp)
ENG - 41
ENG
Tips
Do not work with the shredding and slicing disc more than 2 minute at a time. After 2 minute
of continuous operation, allow the appliance to cool down for 5 minutes.
Use only the foodstuffs listed in the processing instructions.
Do not attempt to cut or grate food such as cheese, tomatoes, lemons, dates, peaches, or
frozen foods.
PROCESSION INSTRUCTION whEN USING ThE ShREDDING AND SLICING DISC
Cutting
Cabbage
Remove the center and cut the cabbage into pieces that will fit into the filling-tube opening.
Carrots
Peel and cut into 7 cm pieces
Onions
Peel and cut in two
Potatoes
Peel and cut into pieces that will fit into the filling-tube opening.
Cucumber
Cut in two
Shredding
e. g. Chinese cabbage, carrots, cucumber, potatoes
Peel and cut into pieces that will fit into the filling-tube opening.
hOw TO USE ThE BLENDER
Before using for the first time, carefully wash the jug lid “j”, measure cup “k” and the inside of
blender jug with warm soapy water.
Clean the inside of the blender jug. A cleaning brush can be used to avoid direct contact with the
blade, rinse and dry thoroughly.
Wipe the outer parts of the blender jug and motor unit “a” with a damp sponge or cloth.
(Pic C1) Place the blender jug “i’ onto the motor unit. Making sure the clamps are locked into
place.
(Pic C2) Fill the blender jug “i” with ingredients, but never over the maximum line. (500ml)
(Pic C3, C4, C5) Place the jug lid “j” onto the blender jug “i’.
(Pic C6) Place the measuring cup “k” onto the jug lid “j”.
(Pic C7) Be sure the jug lid is securely in place, plug in. Rotate the speed selector (aa) to
“ON” position.
Note:
If you need to add extra ingredients remove the measure cup “k” from the jug lid “i”. Your can
use the measure cup to measure and add liquids through the top hole on the jug lid, or just add
ingredients through the hole.
(PicC8, C9) After using, switch off the appliance and disconnect the plug from the power
outlet. And refer to “Clean & Care Instructions” for cleaning. Remove the blending “i” from
motor unit. Don’t remove the jug lid “j”, pure out the liquid in the jug, the jug lid can separate
the foam from the liquid.
TIPS
Add ingredients to the blender jug gradually each time to ensure proper blending and to pre
-
vent overflow. Never fill the juice with more than 500ml.of any liquid and/or food. Make large
portions of food in several batches.
•
•
•
•
•
•
•
•
•
•
Summary of Contents for UM 168
Page 46: ...Poznámky Notatka Notes ...
Page 51: ...Poznámky Notatka Notes ...
Page 52: ...Seoul Korea ...