Hyundai TUSCON, Owner'S Manual

Page: 109 / 305

1
FEATURES OF YOUR HYUNDAI
97 97 97 97 97
NOTE:
When the A/C is operated continuously on the floor-defrost level ( ) or defrost level ( ), it may cause
fog to form on the exterior windshield because of the temperature difference. At this time set the air flow
control to the face level position ( ) and fan speed control to the low position.
To remove interior fog on the windshield:
o Set the air flow control to the defrost ( ) position.
(The A/C will be turned on automatically and "Fresh"
mode will be activated.)
o Set the temperature control to the desired position.
o Set the fan speed control between "1" and "4" position.
To remove frost or exterior fog on the windshield:
o Set the air flow control to the defrost ( ) position.
(The A/C will be turned on automatically and "Fresh"
mode will be activated.)
o Set the temperature control to the warm.
o Set the fan speed control to position "3" or "4".
o Activate windshield wiper blade de-icer (If installed)
B720A01JM-AAT
DEFROSTING/DEFOGGING
B720B01JM
B720B02JM
Use the heating/ventilation system to defrost or defog the windshield:
A Type B Type A Type
B Type