Hyundai Tucson 2005, Owner'S Manual

Page: 258 / 273

1
FEATURES OF YOUR HYUNDAI
68
2. Press the "COMP" button for more than 3
seconds. The current zone number will
appear in the display.
3. Press the "COMP" button until the new zone
number appears in the display. After you
stop pressing the button, the display will
show a compass direction within a few sec-
onds.
!
CAUTION:
1. Do not install a ski rack, antenna, etc.
attached to the vehicle by means of a
magnet. They affect the operation of the
compass.
2. If the compass deviates from the correct
indication soon after repeated adjust-
ment, have the compass checked at an
authorized dealer.
3. The compass may not indicate the cor-
rect compass point in tunnels or while
driving up or down a steep hill.
(The compass returns to the correct
compass point when the vehicle moves
to an area where the geomagnetism is
stabilized.)
3.Calibration procedure
If the display is "C", calibrate the compass.
- Drive the vehicle in a circle in a safe, open
area at less than 5miles/h 3 times or until the
compass heading appears.
- Driving in a circle in a right-handed direction
and opposite direction are possible, and if the
calibration is completed, the compass head-
ing will appear.
- Keep driving in a circle until a compass
heading appears.
4.Setting the compass zone
1. Find your current location and variance zone
number on the zone map.
CAUTION:
When cleaning the mirror, use a paper towel
or similar material dampened with glass
cleaner. Do not spray glass cleaner directly
on the mirror as that may cause the liquid
cleaner to enter the mirror housing.
1.To operate the compass feature
The compass is a convenient feature which
displays the compass heading of the vehicle.
!
2."COMP" switch
Push the "COMP" switch on the lower part of the
mirror, then the vehicle's directional heading will
be displayed. Pushing the "COMP" switch again
will turn off the display.
Heading display
- E : East
- W : West
- S : South
- N : North
ex) NE : North East
B520C06JM
jmhma-1a.p65 9/24/04, 10:09 AM 68