ENG
ENG - 27
PROGRAMMED PLAY
This can be used to program any desired sequence of tracks.
Up to 20 tracks can be programmed for disc play in any order. Be sure to press the “
STOP
”
button before use.
1) Press the “
PROGRAM
” button, the display will show “
01
” and flash.
2) Select desired track by using the “
SKIP +
” or “
SKIP -
” button.
3) Press the “
PROGRAM
” button again to confirm desired track into the program memory.
4) Repeat step 2 and 3 to enter additional tracks into the program memory.
5) When all the desired tracks have been programmed, press the “
PLAY / PAUSE
” button
to play the disc in the order you have programmed.
6) Press the “
STOP
” button twice to terminate programmed playback.
MODE
Press the “
REPEAT
” button before or during playing CD disc, each press switches the mode
function as follows:
1 - REPEAT 1(The repeat indicator is flashing.)
2 - REPEAT ALL(The repeat indicator is steadily on.)
3 - NORMAL PLAYBACK
RANDOM
Press the “RANDOM” button when playing CD. All tracks will be played randomly.
NOTE:
The “
REPEAT
” and “
RANDOM
” function can only be used in CD mode.
PLAYING USB
1) Press the "
FUNCTION
" button to select the “
USB
” mode.
2) The display will show “
U
”.
3) Connect a USB storage device directly into the port. Playback will automatically start after
a few seconds.
4) Adjust the “
VOLUME
” control to the desired level.
5) Select desired track by using the “
SKIP +
” or “
SKIP -
” button
NOTE:
• Always directly connect a USB storage medium to the USB port to prevent any
malfunctions.
• The USB port is not designed for charging external devices.
CAUTION:
Switch the device to a different operating mode before you remove the USB storage device.
