ENG - 33
PLAYING A CASSETTE
1. Select TAPE source.
2. Press
STOP•EJECT
to open the cassette door.
3. Insert a recorded cassette and close the cassette door.
4. Press PLAY to start playback.
5. To interrupt playback, press
PAUSE
. To resume, press the key again.
6. By pressing
or
on the set, fast winding of the tape is possible in both directions.
7. To stop the tape, press
STOP•EJECT
.
– The keys are automatically released at the end of the tape, except if
PAUSE
has been acti
-
vated.
RECORDING
GENERAL INFORMATION ON RECORDING
• Recording is permissible in so far as copyright or other rights of third parties are not infringed.
- This deck is not suitable for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes. For recording, use NORMAL
type cassettes (IEC I) on which the tabs have not been broken.
- The best recording level is set automatically. Altering the VOL
and DBB controls will not affect the recording in progress.
- At the very beginning and end of the tape, no recording will
take place during the 7 seconds, when the leader tape passes
the recorder heads.
- To protect a tape from accidental erasure, have the tape in
front of you and break out the left tab. Recording on this side is no longer possible. To record
over this side again, cover the tabs with a piece of adhesive tape.
Recording from the radio
1. Tune to the desired radio station (See TUNING TO RADIO STATIONS ).
2. Press
STOP•EJECT
to open the cassette door.
3. Insert a suitable cassette into the cassette deck and close the cassette door.
4. Press RECORD to start recording.
5. For brief interruptions, press PAUSE. To resume recording, press PAUSE again.
6. To stop recording, press
STOP•EJECT
.
MAINTENANCE
Tape deck maintenance
To ensure quality recording and playback of the tape deck, clean
parts A , B and C shown in the diagram below, after approx. 50 hours of operation, or on avera
-
ge once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning
fluid to clean the deck.
1. Open the cassette door by pressing
STOP•EJECT
.
2. Press PLAY and clean the rubber pressure rollers C .
3. Press PAUSE and clean the magnetic heads A and also the Capstan B .
4. After cleaning, press
STOP•EJECT
.
Note: Cleaning of the heads can also be done by playing a
cleaning cassette through once.
ENG
Summary of Contents for TRC 591 A
Page 38: ...Pozn mky Notatky Notes...
Page 39: ...Pozn mky Notatky Notes...
Page 40: ...Seoul Korea...