ENG - 40
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair. Do not open
the set as there is a risk of electric shock. If you are unable to remedy a problem by following
these hints, consult your dealer or service center.
WARNING:
Under no circumstances should you try to repair the set yourself, as this will invalidate
the warranty.
Problem
Solution
No sound /power
Volume not adjusted
Adjust the VOLUME
Power cord not securely connected
Connect the AC power cord properly
Batteries dead/ incorrectly inserted
Insert (fresh) batteries correctly
Display does not function properly/No
reaction to operation of any of the controls
Electrostatic discharge
Switch off and unplug the set. Reconnect
after a few seconds
Poor cassette sound quality
Dust and dirt on the heads, etc.
Clean deck parts etc., see Maintenance
Use of incompatible cassette types (METAL
or CHROME)
Only use NORMAL (IEC I ) for recording
Recording does not work
Cassette tab(s) may be broken
Apply a piece of adhesive tape over
the missing tab space
-
•
-
•
-
•
-
•
-
•
-
•
-
•
No disc indication
No CD inserted
Insert a CD, CD-R or CD-RW
CD badly scratched or dirty
Replace/clean CD, see Maintenance
Laser lens steamed up
Wait until lens has cleared
CD-R is blank or the disc is not finalized
Use a finalized CD-R
CD/MP3 playback does not work
CD badly scratched/ dirty
Replace/clean CD (see maintenance)
Laser lens steamed up
Wait until lens has adjusted to room
temperature
The CD skips tracks
CD damaged or dirty
Replace or clean CD
Program is active
Quit Program mode(s)
-
•
-
•
-
•
-
•
-
•
-
•
-
•
-
•
Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3 Materials:
cardboard, paper pulp and expandable polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized
Compacts. Please observe the local regulations regarding the disposal of packaging, Dead
batteries and old equipment.
-
•
