Hyundai softman DVD R700, User Manual

Page: 21 / 38

► In case of parking mode set in auto, the device automatically switches to parking
mode recording when the car is turned off. If motion is detected within view angle of
lens, the device starts recording.
► When the car is turned on, the device automatically switches to normal recording.
► In case of no motion detected in parking mode recording
,
LED1 is on in blue color and
LED2 is off .
► In case of motion detected
,
LED1 is on in blue color, LED2 turns to red color until the
recording is finished.
C. Automatic switch to parking mode recording
Motion detection recording
(no motion detected)
Motion detection recording
(motion detected)
❖
To set up parking mode to auto or manual, the configuration is necessary by PC Viewer. Default is manual.
NOTE
❖
In parking mode set in auto, you can choose [Voltage Sensing] and [Vibration Sensing]. Default is [Voltage Sensing] in auto mode.
❖
When using the device for the first time after setting up [Voltage Sensing] in parking mode, the device needs to check the car turned
on and off. In case of [Vibration Sensing], checkup is not necessary.
❖
In case of [Voltage Sensing], turn on the car and press “ “. Afterward, turn off the car and press “ “ to finish the setup.
Now [Voltage Sensing] in parking mode is activated.
HOT
POINT
Normal recording mode and [Voltage Sensing] of parking mode are automatically switched by the voltage measurement.
To use [Voltage Sensing] of parking mode,
the following are required.
❖
To use the function of parking mode recording, the device should be directly connected with the power supply of car. Ask for auto-mechanic,
regarding the direct connection.
NOTE
6. Basic operation
❖
In parking mode recording, the number of files created are different depending on the capacity of microSD card. It is max. 150 files based on 16GB.
❖
If the folder is full, the firstly saved files are automatically deleted in order so the new files are saved continuously.
❖
In parking mode recording, the device does not carry out normal recording.
NOTE
► Files are saved in parking folder in time sequence.
► The form of file names is same with one by normal recording.
B. Event recording occurred in parking mode recording
► When event is occurred in parking mode recording, LED2 turns to red color until the recording
is finished
.
► One file is max. 20 sec (before 10 sec & after 10 sec based on impact occurred).
G-sensor sensitivity can be managed by PC Viewer
.
NOTE
6. Basic operation
R 700 R 700 20
21