
FEATURES AND CONTROLS
SANTA FE
11
10
HYUNDAI
HOMELINK WIRELESS CONTROL SYSTEM
Home Link
INTERIOR LIGHTS
Push the lens
to turn the
map lamp on or off.
ON
Map lamp and room lamp will turn on.
OFF
The lights stay off.
DOOR
Map lamp and room lamp
comes on when any door is opened.
ROOM
Map lamp and room lamp come on.
Press the switch to turn the light
on or off.
Map lamp
Room lamp
5
4
Without sunroof
Without sunroof
4
5
1
1
Standard Programming
To train most devices, follow these instructions:
1. For first-time programming, press and hold the two outside
buttons, HomeLink
®
Channel 1 and Channel 3 Buttons, until the
indicator light begins to flash (after 20 seconds). Release both
buttons. Do not hold the buttons for longer than 30 seconds.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm)
away from the HomeLink
®
buttons while keeping the indicator light
in view.
3. Simultaneously press and hold both the HomeLink
®
and hand-held
transmitter button. DO NOT release the buttons until step 4 has
been completed.
4. While continuing to hold the buttons the red indicator Status LED
will flash slowly and then rapidly after HomeLink
®
successfully
trains to the frequency signal from the hand-held transmitter.
Release both buttons.
For detail instructions, refer to your Owner’s Manual or visit
www.homelink.com.
With sunroof
With sunroof