![background image](http://html.mh-extra.com/html/hyundai/remote-start/remote-start_owners-manual_2197279008.webp)
STEERING WHEEL / STALK / PANEL
7
USING VALET/SERVICE MODE
Using Valet/Service Mode
Service mode is used when servicing the vehicle to prevent the system from unexpectedly starting the engine while being serviced.
While in service mode, the system’s keyless entry functions will operate normally, but the security system will not arm and the
remote start function is temporarily disabled.
The system will honk the horn 2 times if an attempt is made to activate the
remote start system.
To Engage Valet/Service Mode;
turn the ignition key to the ON or RUN position and press and hold the
button for 2 seconds
on the remote control transmitter.
To Exit Valet/Service Mode (Return the system to its normal operating mode);
turn the ignition key to the ON or RUN position
and press and hold the
button for 2 seconds on the remote control transmitter.
Important Note:
When taking your vehicle to the dealer for service, it is recommended that you inform the service personnel that
your vehicle is equipped with a remote control start system.