EN - 26
REPEAT/RANDOM FUNCTION IN CD/MP3 MODE (UNDER CD/USB OPERATION)
Press the PLAY-MODE button on the front panel or REPEAT button on the remote control, the
unit will repeat the playing track and “REP.” will display on the display screen. Press it secondly,
the unit will repeat all the tracks in the folder and will appear on the display. Press it thirdly,
the unit will repeat the whole album and “REP. ALBUM” will show on the display. Press PLAY-
MODE button fourthly or the RANDOM button on the remote control once, the unit will begin
random playback and “RANDOM” will display on the screen. Press DN/F-R or UP/F-F button
to select tracks randomly. To cancel the random playback, press PLAY-MODE once. Press the
STOP button to stop playing.
TRACK SKIP AND HIGH SPEED TRACK SERCH IN CD/USB MODE
During CD/USB playback, press UP/F-F (Fast Forward) or DN/F-R (Fast Reverse) button
Repeatedly will skip to higher or lower tracks. Release the button when your desired track
number is shown. The disc will begin to play from your selected track.
To rapidly search forward or backward within a track and locate a specific passage of it, press
and hold UP/F-F or DN/F-R button. The player will search forward or backward at a high speed.
Release the button when you hear your desired passage and the playback will resume normal
from the point.
MEMORY FUNCTION IN CD/USB MODE
1. In CD stop mode, press the PLAY-MODE button on the unit or PROGRAM button on the
remote control and enter PROG mode, “PROG” will appear and flash on the display screen.
2. press the UP/F-F or DN/F-R button to select your desired track, and press the PLAY-MODE
or PROGRAM button to confirm.
3. Repeat step 2 to program the track sequence.
4. In MP3 mode under CD/USB operation, the setting procedure of MP3 memory is the same
as that of CD memory mentioned above.
5. Press the PLAY/PAUSE button to play the stored tracks, press UP/F-F or DN/F-R to select
a track in sequence saved.
6. Press the STOP button to leave program mode. The entire program stored in memory is
canceled.
Note
: You can store a total of 99 MP3 tracks and 20 CD tracks.
RADIO OPERATION
1. Press the POWER button on the front panel to turn the system ‘on’ and set the volume to
a low level. Press FM button and enter FM mode.
2. Rotate the TUNING control to tune the desired radio station.
3. When you finished listening, press the POWER button again to turn the system off.
The display backlight go off.
FM RECEPTION
The FM wire antenna is located on the back cabinet. If necessary adjust
the position and direction of this antenna for the best reception.
AM RECEPTION
The AM antenna is inside the cabinet. If reception is unsatisfactory try repositioning the cabinet
slightly for the strongest signal.
AUX OPERATION
Press AUX IN button on the front panel and enter AUX IN mode. Insert the audio cable (not
included) into the AUX IN socket at the back of the device. Connect the other end of the cable to
your device. Adjust the volume using the volume control on the front of device.