Hyundai RC 406, Instruction Manual

Page: 30 / 40

EN - 30
PREPARATION FOR USE
UNPACKING AND SET UP
● Carefully remove the unit from the display carton and remove all packing material from the unit.
● Unwind the AC power cord and extend it to its full length.
● Unwind the FM Antenna wire and extend it to its full length.
● Place the unit on a stable, level surface, convenient to an AC outlet, out of direct sunlight,
and away from sources of excess heat, dust, moisture, humidity, or strong magnetic fields.
● Connect the plug to your AC outlet.
POWER SOURCE
This product is designed to operate on normal 220V 50Hz AC only. Attempting to
operate this system from any other power source may cause damage to the system,
and such damage is not covered by your warranty.
NOTE:
This unit has a polarized AC plug with one wide blade and one narrow blade. This plug will only fit
into a matching polarized AC outlet. This is a safety feature to reduce the possibility of electric
shock. If this plug will not fit in your AC outlet, you probably have an outdated non-polarized outlet.
You should have your outdated outlet changed by a qualified, licensed electrician. Do not file the
wide blade on the plug, or use an adapter to make the plug fit into your outlet. This defeats the
safety feature and could expose you to electric shock.
IMPORTANT: Raising And Lowering The CD Door
● Manually raise the door until it is fully open. The door support bracket will hold the door in the
open position.
● To close the door pull the door support bracket toward you to release it and lower the door.
TO AVOID DAMAGE TO THE DOOR OR TO THE CABINET, NEVER ATTEMPT TO FORCE
THE DOOR CLOSED WITHOUT FIRST RELEASING THE DOOR SUPPORT BRACKET.