EN
EN - 21
PRESETTING YOUR FAVOURITE RADIO STATION
Up to 10 FM and 10 AM radio stations can be preset.
1. Follow steps in “RADIO OPERATION” and tune into the station that you wish to preset.
2. Press and hold
SET
for about 2 seconds, “P01” will flash on the display.
3. Press
SET
again to store the station.
4. Repeat steps 1 to 3 to store desired stations.
5. To listen to preset radio stations, press
MEM
repeatedly to select the
desired radio station.
DUAL ALARMS OPERATION
Before setting the alarm time, make sure the Clock has been set.
SETTING ALARM 1 OR ALARM 2
1. In standby mode, press and hold
AL1
or
AL2
for 2 seconds.
• The hour and minute digits will flash.
2. Set the alarm time by repeatedly pressing
HR
and
MIN
respectively.
• Press and hold
HR
and
MIN
respectively for fast advance.
3. Press
AL1
or
AL2
again to select the alarm sound (OFF>BUZZER>RADO in cycle.
CHECKING ALARM TIME
Press and hold
AL1
or
AL2
for 2 seconds, the alarm time will flash on the display.
To turn off the alarm
, press
POWER
and the alarm will come on again at the set time on the
following days.
To cancel the alarm
, repeatedly press
AL1
or
AL2
until the alarm indicator light goes out on
the display.
SNOOZE FUNCTION
This function can be used to stop the alarm temporarily for about 9 minutes once the alarm is
activated. When the snooze button is pressed, the buzzer or radio alarm sounds will stop and
sound again after about 9 minutes.
SLEEP TIMER OPERATION
The sleep function is designed to automatically turn off the Radio.
SETTING SLEEP TIMER
1. Press
SLEEP
.
• “90” will illuminate on the display.
2. Repeatedly press
SLEEP
to select the desired sleep time from 90, 80,
70, 60, 50, 40, 30, 20 or 10 minutes.
3. The radio will be turned off after the selected time has elapsed.
To check remaining sleep time,
press
SLEEP.
To cancel sleep timer,
press
SLEEP
until “OFF” is selected.
To turn off the radio before the sleep time has elapsed,
press
POWER.
PROJECTOR
Switch on the projection clock with the Projection On/Off Selector (14).
Rotate
: Scroll for setting the best projection clock viewing angle.
Focus Thumbwheel (15)
: Scroll for setting the best projection clock image.
