EN - 14
LOCATION OF CONTROLS
1)
Alarm Set Button
2)
Time Set Button
3)
Sleep Set Button
4)
Power cord
5)
FM Antenna
6)
Snooze Button
7)
Hour Set Button
8)
Minute Set Button
9)
Volume Control
10)
Band Selector
11)
Tuning Control
12)
LED Display
13)
Function Selector
14)
Auto Indicator
15)
Battery Door
16)
Hi-Low Dimmer Selector
REAL TIME SETTING
1)
Set the Function Selector (13) to”OFF”. Connect the mains lead to the power supply.
The clock display will flash on and off indicating a power interruption and that the displayed
time is incorrect.
2)
To set the correct time, press the Time Set Button (2) and Hour Set Button (7),
or Minute Set Button (8), together, until the correct time is displayed.
3)
Open the Battery Door (15) on the back of the unit and put in a 6LR61/6F22 (or equivalent)
9-volt battery (battery not included). The purpose of this battery is to store the information
relating to alarm time and to keep the clock functioning in the event of disconnection from
the mains supply or power interruption. Should this occur, the clock would continue to keep
time, but will not display.
Note:
• The clock accuracy will decrease due to the voltage drop of the backup battery.
If no backup battery is installed or the power interruption is prolonged, time re-set
will be required.
• When operating from battery only, the clock will only remain accurate for a short period of
time. It is important that the mains supply is restored as soon as possible.
ALARM TIME SETTING
1)
Press the Alarm Set Button (1) and simultaneously press the Hour Set Button (7)
or Minute Set Button (8) as appropriate until the required alarm time is reached.
2)
To double check the alarm time, simply press the Alarm Set Button (1) then the display will
show the pre-set alarm time.
