background image

Product End-of-Life Disassembly Instructions

 

 

Product Category: Monitors and Displays 

Marketing Name / Model 
[List multiple model if applicable]

 

LCD Monitor / R329DP* 
           
 

Purpose

: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic 

instructions for the disassembly of HKC IT products to remove components and materials requiring selective treatment, 
as defined by EU directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE). 

1.0 Items Requiring Selective Treatement 

1.1 Items listed below are classified as requiring selective treatment. 
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as 
applicable. 

Item Description 

Notes 

Quality   
of items 
included 
in product 

Printed Circuit Board (PCB) or Printed Circuit 
Assemblies (PCA) 

With a surface greater than 10 sq   

Batteris 

All types including standard alkaline and lithium 
coin or button style batteries    None     

Mercury-containing components 

For example, mercury in lamps, display backlights. 
Scanner lamps, swithches, batteries 

Liquid Crystal Display (LCD) with a surface 
greater than 100 sq cm 

Included background illuminated displays with gas 
discharge lamps 

Cathode Ray Tubes (CRT) 

None 

 

Capacitors / Condensers (Containing PCB/PCT) 

None 

 

Electrolytic Capacitors / Condensers measuring 
greater than 2.5 cm in diameter or height 

Electrolytic Capacitors 

External electrical cables and cords 

DP cable, HDMI cable 

Gas Discharge Lamps 

None 

Plastics containing Brominated Flame Retardants 
weighing > 25 grams (not including PCBs or 
PCAs already listed as a separate item above) 

None 

Components and parts containing toner and ink, 
including liquids, semi-liquids (gel/paste) and 
toner 

Include the cartridges, print heads, tubes, vent 
chambers, and service stations.    None 

Components and wates containing asbestos 

None 

Components, parts and materials containing 
refactory ceramic fibers 

None 

Components, parts and material containing 
radioactive substances 

None 

 
 
 
 
 
 
 
 
 

Summary of Contents for R329DP Series













Reviews: