Hyundai R160LC-9 Operation Manual Download Page 15

0-12

AIR CONDITIONER FILTER 

AIR CONDITIONER FILTER (item 24)
This warning label is positioned on the air 
conditioner cover.
Periodic  and  proper  inspection,  cleaning 

Periodic and proper inspection, cleaning 
and change of filter prolong air condition-

and change of filter prolong air condition-
er  life  time  and  maintain  good  perfor-

er life time and maintain good perfor-
mance.

mance.

21070FW26

SAFETY LEVER 

SAFETY LEVER (item 26)
This warning label is positioned on the 
cover of the safety lever.
Before  you  get  off  the  machine  be  sure 

Before you get off the machine be sure 
to  place  the  safety  lever  LOCKED  posi-

to place the safety lever LOCKED posi-
tion.

tion.

30007A1FW07A

22)

22)

ö

23)

23)

REDUCTION GEAR GREASE 

REDUCTION GEAR GREASE (item 31)
This warning label is positioned in the front 
of upper frame.
Grease is under high pressure.

Grease is under high pressure.
Grease  coming  out  of  the  grease  plug 

Grease coming out of the grease plug 
under  pressure  can  penetrate  the  body 

under pressure can penetrate the body 
causing injury or death.

causing injury or death.

21070FW35

CLAMP-LOCKING 

CLAMP-LOCKING (item 32)
This warning label is positioned on the right 
side window of cab.
Serious  injury  or  death  can  result  from 

Serious injury or death can result from 
dropping bucket.

dropping bucket.
Operating  the  machine  with  quick  clamp 

Operating the machine with quick clamp 
switch  unlocked  or  without  safety  pin  of 

switch unlocked or without safety pin of 
moving  hook  can  cause  the  bucket  to 

moving hook can cause the bucket to 
drop off.

drop off.

14070FW60

24)

24)

25)

25)

Summary of Contents for R160LC-9
























Reviews: