Hyundai PR150, Instruction Manual

Page: 15 / 24

ENG
ENG - 1
RADIO OPERATION
For AM reception, this unit uses an internal directional aerial, rotate the unit for best reception.
For FM reception, the wire FM Antenna (14) on the back of the unit should be fully unwound.
Set the Function Selector (11) to the “ON” position and the Buzzer / Radio Selector (12) to
the “RADIO” position.
Set the Waveband Selector (4) to the required waveband.
Use the Tuning Control (3) to select the desired station.
Adjust the Volume Control (2) to the desired listening level.
To turn off the radio, set the Function Selector (11) to ”OFF”. If the radio does not switch
off this may be caused by inadvertent operation of the Sleep Set Button (7). To cancel this,
press the Snooze Button (5) once.
wAKE TO RADIO
Having selected your desired station and adjusted the desired listening level, proceed as fol -
lows:
Follow the instructions for “ALARM TIME SETTING” above.
When the desired alarm time has been selected, set the Function Selector (11) on the
“AUTO” position and set the Buzzer/ Radio Selector (12) to “Radio”.
The radio will switch on automatically at the pre-set alarm time.
The alarm can be temporarily stopped for 9 minutes by pressing the Snooze Button (5)
once.
Depress the Alarm Set Button (6) to turn off the radio. The alarm will activate again after 24
hours unless the Function Selector (11) is set to “OFF”.
wAKE TO BUzzER
Follow the instructions for “ALARM TIME SETTING” above.
When the desired alarm time has been selected, set the Function Selector (11) to the
“AUTO position and set the Buzzer/ Radio Selector (12) to “Buzzer”.
The alarm tone will switch on automatically at the pre-set alarm time.
The alarm can be temporarily stopped for 9 minutes by pressing the Snooze Button (5)
once.
Depress the Alarm Set Button (6) to turn off the buzzer. The alarm will activate again after
24 hours unless the Function Selector (11) is set to “OFF”.
SLEEP TO RADIO
The radio can be set to switch off automatically after a period of time from 1 minute to 1 hour
and 59 minutes, by following this procedure:
Select the Function Selector (11) in the “OFF” position or “AUTO” position. Then depress the
Sleep Set Button (7) and the Minute Set Button (10), or Hour Set Button (9) until the display
shows the exact sleep time you wish the radio to continue to play before switch off. To switch off
the radio before the end of the registered sleep time period, simply press the Snooze Button (5)
once.
1.
.
.
.
.
1.
.
.
.
.
1.
.
.
.
.