EN - 22
19) FM Antenna
20) Aux In Jack
21) Line Out Jack
22) Power Cord
MAINS CONNECTION
Make sure that all of the components connected correctly.
Check that the voltage level required by your equipment matches the local mains supply,
namely 230 VAC - 50 Hz.
Plug the unit into the wall outlet.
hEADPhONES
Make sure that your headphones have a 3.5 mm stereo jack and an operating impedance
of 8-32 ohms. The speakers are automatically switched off when headphones are connected.
LISTENING TO ThE RADIO
• Press the Power Button to power on the unit.
• Press the Function Button and select the Radio mode.
• Choose the radio ware band (AM, FM or FM ST) using the BAND Button
• Search for the station of your choice using the Tuning knob.
• To switch off the radio, Press the Function Button to elect the USB/SD or Aux mode or press
the Power button to off the unit..
NOTE:
For optimum FM radio reception, extend the FM antenna wire. For AM radio reception,
a ferrite antenna built into the unit is used. To improve reception quality, rotate the unit.
USB AND SD/MMC FUNCTION
• Press the Power Button to power on the unit.
• Select the USB/SD Mode function.
• The unit will identify the SD/MMC mode first when you insert the USB drive or SD/MMC
card together
• Press the Mode button to change to the USB or SD/MMC card mode.
• The display shows the total number of tracks present on the media connected to the USB
or SD/MMC port, then start to play the song.
• Press the USB or SD button again and change back to USB or SD mode.
• Press the Function switch to select the other mode
