EN - 34
DVB-T PART
1. First Time Installation
If you are using the receiver for the first time, a
First Time Installation
menu will be displayed
to guide you through the initial setup. Use the remote controller to finish the setup.
A. At the
First time installation
menu, You can select your regional settings, include your
Language,Country, TimeZone .
B. Then Select <
ENTER
> to start the automatic channel search
C.
Wait to complete the scanning.In case you want to stop the scanning, press the <
EXIT
>
button. The channels already found will still be stored.
D.
When finished, all active channels found will be stored automatically.
The last found channel will be played.
E. If you want to reset
your regional settings and clear all the, you can select
<
FTA Default Setting
>
and confirm to reset it
.
2. DVB Mode of Main Menu
Press the <
SETUP
> or <
MENU
>button, the DVB main setup menu appears
the screen, then press the <
DOwN
> button to highlight the DVB Menu option.
A. Auto Search
Choose the Automatic Search options.
This operation same the First Time Installation. Refer to First time Installation.
B. Manual Search
If any channel is missing after auto search, or you want to add newly launched channels,
you can use
Manual Search
to scan the desired channels. To manually search the target
channel, you must know its parameters, e.g., the Frequency and Bandwidth.
Select <ENTER> button to start manual search.
After the channel is found, it is appended to the current channel list.
If no signal is found, a message indicating no signal will appear.
Otherwise scanned channel will be saved and appended to the current channel list.
Summary of Contents for pdpd 756 dvbt
Page 39: ...Pozn mky Notes...
