Hyundai PDP399SUATV, Instruction Manual

Page: 64 / 72

ENG - 64
TROUBLESHOOTING
Before resorting to maintenance service, please kindly check by yourself with the following
chart.
Symptom Cause(s) Remedy
No Power
The adapter is not con -
nected to the unit securely
or is not connected to the
power supply.
The unit is turned off.
•
•
Connect the adapter to the DC input jack
securely and then plug the adapter into an
AC outlet (for AC/DC adapter) or the cigarette
lighter socket of a car (for cigarette lighter
adapter).
Make sure that the unit is turned on.
•
•
Picture
There is no
picture
displayed on
the
connected
TV.
The TV is not connected to
this unit securely with the
AV cable.
•
Connect the AV OUT jack of this unit and the
AV IN jack of a TV securely with an AV cable.
•
Sound
There is no
sound.
The volume is set to the
lowest level.
The sound is switched off.
The disc is in fast forward/
reverse playback.
The sound is output through
the connected earphone.
•
•
•
•
Turn up the volume.
Press [MUTE] to switch on the sound.
Press [PLAY] to resume the normal playback.
Pull out the earphone and the sound will out -
put through the built-in speakers.
•
•
•
•
Unable to
play a disc
This disc is placed in the
disc tray in a wrong way.
The unit isn‘t compatible
with the disc.
The disc is dirty.
•
•
•
Check that the disc is placed in the disc tray
with its label side upwards.
Clean the disc.
•
•
The player
breaks
down when
a USB drive
or memo -
ry card is
inserted
into the
player.
The connected USB drive
or the memory card is pro -
bably not a certified one.
•
The player cannot play any uncertified USB
drive and memory card. In case the player
breaks down, turn it off, disconnect the power
cord from the AC outlet and unplug the USB
drive or/and the memory card from the player.
Then, power on the player again. The player
will resume the normal status.
•
The
remote
control
does not
function.
There is no battery in the
remote control.
The battery is out of charge.
The remote control isn‘t
pointed to the remote sen -
sor.
The remote control is out of
its operating area.
The unit is shut down.
•
•
•
•
•
Install a CR2025 lithium battery in it.
Replace the battery with a new one.
Make sure that the remote control is pointed
to the remote control sensor.
Make sure the remote control is within the
operating area.
Switch off the unit and disconnect it from the
AC outlet. Then power on the unit again.
•
•
•
•
•