EN - 65
EN
1.5 SCREEN SAVER
ON:
If the image remains motionless on the screen, for example the disc is paused, stopped
etc, for several minutes, a screen saver will appear on the screen. You can press any key or
button except [STANDBY] to wake it up.
The unit will go into the standby mode after about 20 minutes being in the screen saver mode.
You can press
[STANDBY] to switch it on.
OFF:
Disable the screen saver function.
1.6 LAST MEMORY
ON:
During playback or in the paused/stopped status each time you open the disc tray or turn
off the player, the unit will memorize the last playback time. Next time when you insert the same
disc and close the disc tray to load the disc, the unit will play from the memorized point.
OFF:
Disable the last memory function.
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT:
The 5.1-channel audio is mixed into left channel and right channel and is output via the
FL and FR speakers respectively.
STEREO:
The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR
speakers.
NOTE:
This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.2. DIGITAL AUDIO SETUP
2.2.1 DIGITAL OUTPUT
SPDIF OFF
: There will be no digital audio signal output. (Coaxial off)
ALL:
The digital audio signal output will be in its raw format. Normally, this m ode is used for
DTS & Dolby Digital
5.1 signals.
PCM ONLY:
The digital audio signal output will be in PCM format. Normally, this mode is used
for audio CD signals.
2.2.2 LPCM OUT
When
DIGITAL OUTPUT
is set to
PCM ONLY
, this item is available.
Select a sample rating for the analog audio output. There are two options, 48KHz and 96KHz.
NOTE:
Some amplifiers don‘t support 96KHz sampling which will affect the coaxial output.
2.3 DOLBY DIGITAL SETUP
2.3.1 DUAL MONO
STEREO:
The player outputs the left-channel audio and right-channel audio via the FL and FR
speaker respectively.
L-MONO:
The player outputs the left-channel audio only via both the FL and FR speaker.
R- MONO:
The player outputs the right-channel audio only via both the FL and FR speaker.
MIX- MONO:
The player outputs the average signal of the left-channel and right-channel audio
via the FL speaker and the FR speaker.
NOTE:
This function only applies to the Dolby AC -3 encoded 2-channel discs.
Summary of Contents for MSD801
Page 78: ...Poznámky Poznámky notatky notes ...
Page 79: ...Poznámky Poznámky notatky notes ...
Page 80: ...Seoul Korea ...
