EN - 94
Figure 3.2
If ‘Multi track’ is selected, use the digit keys to input the track number, then use the direction
keys to move the highlight to another position to go on to set another track number with digit
keys.
After you finished, select ‘START’ to begin the ripping process(Figure 5).
Select ‘EXIT’ to cancel and quit the menu.
NOTE:
[10+] doesn’t function during your inputting of track numbers for CD ripping.
To put it precisely, if you want to input 15 for example, you should press [1] and [5]; to input 35,
you should press [3] and [5], etc.
Figure 4
The ripped tracks from CD or HDCD
discs will be stored in a folder created automatically by the system in the connected USB drive.
If the selected track shares the same file name with the existing one in that folder, the system
will pop up a dialogue box(Figure 4) to warn you of that. Press [ENTER] to continue and replace
the existing one with the selected track.
Select ‘Cancel’ to quit. You can choose to create another folder for ripping this track.
Create a new folder
If you want to create another folder in the connected USB drive to save the ripped tracks, you
need to open the disc tray and then close it. The tracks ripped afterwards will be saved in a
newly created folder.
Figure 5 and Figure 6
During ripping, a progress bar is displayed showing the ripping procedure. And the option ‘Can
-
cel’ below is highlighted, so if you want to stop ripping, just press [ENTER]. Then a warning
dialog box (Figure 6) will pop up. Press [ENTER] to stop ripping while select ‘Cancel’ to continue
the ripping procedure.
Summary of Contents for MSD762ATV
Page 98: ...Poznámky Poznámky notatky notes ...
Page 99: ...Poznámky Poznámky notatky notes ...
Page 100: ...Seoul Korea ...