EN - 72
3 – CONNECT SPEAKERS
Make sure the power is turned off to prevent possible damage to the systém.
Connect the speakers´ wires to the connection on the back panel of the DVD system.
To insert a speaker wire, press down the thumb levers, fully insert each tip of wire into its
connector, and then release the thumb levers to lock the wire in place.
CAUTION:
To prevent damage to circuits, do not short-circuit the positive and negative speaker output
jacks. Make sure the exposed tips of each speaker wire are separated to the distance that
they cannot touch each other after they are inserted into the connectors.
Do not connect any other speakers or devices that are not included with this system.
4 – CONNECT FM WIRE ANTENNA
Connect the supplied FM wire antenna to the FM antenna connector on the back panel.
Be sure to fully extend the FM wire antenna. Make use of the small loop at the free end of
the antenna to maintain its position.
If noise or interference occurs, use an external antenna with a 75 ohm coaxial cable (not
included).
5 – CONNECT EXTERNAL AUDIO
The back panel of the DVD System provides.
AUX IN
Connect to an external stereo audio input.
LINE OUT
Connect to the inputs of external Audio System.
COAXIAL OUT
Connect to an external audio decoder.
1.
2.
3.
-
-
1.
2.
3.
1.
2.
3.
Summary of Contents for MSD617DRU
Page 86: ...Pozn mky Pozn mky notatky notes...
Page 91: ...Pozn mky Pozn mky notatky notes...
Page 92: ...Seoul Korea...
