Hyundai MSD 513 DR, Instruction Manual

Page: 86 / 104

PLAYING THE RADIO
Basic operations
1. Press FM button to select desired wave
Band
2. Press CH+ or CH- button to find a station.
The frequency will change with each press.
When a station‘s signal is received, it will
appear in the display.
3. To lock onto a station quickly, hold the CH+
or CH- button for two seconds. The unit
will start automatic tuning. When a station
is found, automatic tuning stops.
4. To listen a frequency-known station, you can
input the station frequency directly by pres
sing the number keys one by one in tune sta -
te.
5. To add a station to memory, press the MEMO
button. The memory storage number will
blink for four seconds in the display. Press
MEMO again to store the station.
6 .To reduce noise when an FM-stereo program
has been received, press the FM mode button.
The word STEREO will disappear from the dis
play. The program is now heard in monogra-
phic form, reducing the noise. To resume stereo
play, press the FM mode button again.
Automatic Tuning
This unit will store up to 50 individual
FM radio stations in its memory.
1. Press the AUTO/SCAN button. the
automatic tuning mode is activated.
2. Stations will be stored in ascending order
until 50 stations of that particular wave
band have been saved. When a station is
stored, the memory storage number, as well
as the station‘s frequency, will flash for four
seconds in the display.
3. When the total number of stations reaches
50, in a particular wave‘s memory, no further
station in that wave band will be saved.
Press the TUNER button to select the desired
wave band.
1. To play preset stations
2. Press the PRESET/TUN button.
3. Press any of the numbered buttons to
select the desired station‘s memory num
ber. For example, to play the station at memo-
ry #5, simply press the 5 button; for memory
#17, press the 1 button followed by the 7
button.
4. Stations in the memory function may also
be accessed by pressing the CH- or CH+
button.
ENG - 86