EN - 40
RADIO OPERATION
AUTOMATIC TUNING
1) Press the “FUNCTION” button to select “TUNER” mode.
2) Press and hold the “SKIP +” or “SKIP -” button over 3 seconds to start automatic tuning process.
3) When a station is tuned in the tuning process, it will stop automatically and you can listen to
your desired station.
MANUAL TUNING
It is for selecting stations, which cannot be tuned automatically. (manual selection)
To tune a channel manually.
-
Skip step 3 in the above procedures.
-
In step 2, each time the “SKIP +” or “SKIP -” button is pressed momentarily (0.5 second or
less), the frequency changes by a fixed step:
FM: 0.1 Mhz steps
MEMORy PRESET
1) Repeat step 1 to 3 in the AUTOMATIC TUNING procedures.
2) Press the “MEMORY” button on the remote to start the preset process.
3) Display will show the memory sequence number and a flashing “01”.
4) Press the “PRE-UP” or “PRE-DN -” button on the remote to determine the preset station
number.
5) Press again the “MEMORY” button on the remote to preset your desired station.
6) Once all the stations were preset, press the “PRE-UP” or “PRE-DN -” button on the remote
listen to your desired station.
Notes:
FM can be stored up to 30 stations.
MONO / STEREO
Press the “MONO / ST.” button to achieve the best frequency.
CD / MP3 OPERATION
GENERAL OPERATION
PLAY / PAUSE
Press to start playing CD / MP3 disc.
Press again to stop playing CD / MP3 operation temporarily.
Press again to resume playback.
SKIP +
&
Press to go to the next track or back to the previous track.
SKIP -
Press and hold while playing until you find the point you want to
play.
STOP
Press to stop all CD / MP3 operation.
