EN
EN - 27
TOP PANEL:
13
1) DISPLAY SCREEN
2) STANDBY INDICATOR
3) STANDBY (Hold down this button
to power on the player; press this button
to switch the signal source among CD,
USB, LINE IN, BLUETOOTH, FM)
4) PLAY/PAUSE
5) VOLUME-
6)
7) LINE IN
8) USB SLOT
9) REMOTE CONTROL SENSOR
10) SPEAKER OUTPUT
11) FM ANTENNA JACK
12) AC OUTPUT
13) PUSH (press to open the cover)
CONNECTIONS
Amplifier Audio Input
CD Audio Output
Speaker output
R
L
Speaker
R
L
AUDIO SYSTEM CONNECTION
Speaker Output
Connect the speakers to speaker output terminals with their
attached speaker cables (white for +, black −).
LINE IN
This unit has an extra group of audio input terminal.
You can input the analogue stereo audio signals from extra
devices such as VCD, CD, VCR,MP3 player, etc.
Use the audio cable to connect the stereo audio output terminals
of a VCD, CD, VCR player to the input terminal (LINE IN) of
this unit. Its corresponding signal source is
LINE IN
which can
be available by pressing [SOURCE] on the remote control.
USB PLAYBACK
•
Insert a USB drive in the USB slot, then press [USB]
to enter the connected USB drive and you can playback
the readable files in it.
NOTE:
•
In case the player breaks down when you insert a USB drive into the player, turn off the player,
disconnect the power cord from the AC outlet and unplug the USB drive from the player.
Then, power on the player again. The player will resume the normal status.
•
The USB port is intended for data transfer only, the external devices cannot be charged via
this USB port. The use of USB extension cords is not recommended. Don’t unplug the USB
from the unit when playing or reading the USB device.
