42
Setting
14. Setting
14.1 General Settings
14.1.1 Viewing Audio Information
You can check the radio model number, firmware version and current memory usage condition
in the ‘About’ section of the Setup menu.
The memory usage condition is displayed as in use / total capacity.
1) Press the
button to display the Setup screen.
2) Press
1. General
.
3) Press
1. About
.
14.1.2 Re-setting Touch Calibration
If the touch screen does not operate properly, reset the screen calibration of the touch screen.
1) Press the
button to display the Setup screen.
2) Press
1. General
.
3) Press
2. Screen Calibration
.
4) Accurately touch the points as instructed on the screen to re-calibrate.
14.2 Sound Settings
14.2.1 Equalizer Setting
An equalizer curve for different music types may be selected (CLASSIC, POP, ROCK, and
JAZZ).
1) Press the
button to display the Setup screen.
2) Press
2. Sound
3) Press
1. Equalizer
.
4) Press the desired equalizer type on the screen. The setting is saved and the previous
screen is restored.
5) Pressing the
SET
button allows the user to adjust the sound tone. For more information,
refer to section 14.2.2
6) To cancel, press the button to return to the previous screen.
14.2.2 Audio Settings
The tone and individual speaker levels may be adjusted.
14.2.2.1 Bass, Middle, Treble Setting
1) Press the
button to display the Setup screen.
2) Press
2. Sound
.
3) Press
2. Audio
.
4) Press the
+, -
buttons to adjust or the Bass, Middle, Treble values.
5) Press the
FLAT
button to change the Bass, Middle, Treble values to 0.
6) Press the
BAL/FAD
button to display the Balance, Fader setting screen.
7) Press the button to return to the previous screen.