ENG - 26
STANDBy
STANDBy MODE
1)
Press and hold „STANDBY / PLAY/PAUSE“ button for 2 seconds, unit turn to standby mode.
2)
Press „STANDBY / PLAY/PAUSE“ button once to activate the unit.
RADIO OPERATION
MEMORy PRESET
1)
Press the “CLOCK / FUNCTION” button to select “RADIO” mode.
2)
Press „PROG.“ button to start automatic memory preset.
3)
Once all the stations were preset, press „SKIP +“ or „SKIP -“ button to listen preset stations.
• Please note that Automatic memory preset will be up to 30 preset stations. Also, memory
preset will only search for functioning radio programs. Therefore, if the unit can search
for E.G.20 stations only, then the automatic memory preset will stop at 20 preset stations.
USB / SD OPERATION
GENERAL OPERATION
PLAY / PAUSE
Press to start playing tracks from the USB / SD card.
Press again to stop playing USB / SD operation temporarily.
Press again to resume playback.
SKIP + &
Press to go to the next track or back to the previous track.
SKIP -
Press and hold while playing until you find the point of the sound.
PLAyBACK
1)
Plug or slot in USB / SD card device to the port.
2)
Press the “CLOCK / FUNCTION” button to select “USB / SD” mode.
3)
Playback will start automatically from the first track.
4)
Press the “STANDBY / PLAY/PAUSE” button when you want to stop playback temporarily.
5)
Press the “STANDBY / PLAY/PAUSE” button again to resume playback.
• When USB and SD card plug in unit at the same time, USB playback is priority.
PROGRAM
1)
Press and hold the “PROG.” button for 2 seconds during playing USB / SD Card.
2)
Number of tracks is read and appears on the display.
3)
Press the “PROG.” button, the display will show “P01” and flash.
4)
Select desired track by using the “SKIP +” or “SKIP -” button.
5)
Press the “PROG.” button again to confirm desired track into the program memory.
6)
Repeat step 4 and 5 to enter additional tracks into the program memory.
7)
When all the desired tracks have been programmed, press the “STANDBY / PLAY/PAUSE”
button to play the USB / SD card device in the order you have programmed.
8)
To cancel programmed playback, press the „CLOCK / FUNCTION“ button to re-enter back
to „USB / SD Card“ mode.
