Hyundai Kanabo 1 series, User Manual

Page: 33 / 42

Notebook Manual 33
English
English
English
NOTE : The drivers, BIOS and utilities bundled in the support DVD
may vary by models and are subject to change without notice.
4.1 About BIOS Setup
4.1.1 When to Use BIOS Setup ?
4.1.2 How to Run BIOS Setup ?
You may need to run the BIOS Setup when:
・
An error message appears on the screen during the system booting
up and is requested to run SETUP.
・ You want to change the default settings for customized features.
・You want to reload the default BIOS settings.
To run the BIOS Setup Utility, turn on the notebook and press the [Del]
key during the POST procedure.
If the message disappears before you respond and you still wish to
enter Setup, either restart the system by turning it OFF and ON, or
simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
Be noted that the screen snaps and setting options in this chapter
are for your references only.The actual setting screens and options
on your Notebook may be different because of BIOS update.
The setup function only can be invoked by pressing [Del] or [F2] key
during POST that provide a approach to change some setting and
configuration the user prefer, and the changed values will save in the
NVRAM and will take effect after the system rebooted. The setup
uses a menu interface to allow the user to configure their system
and the features are briefly listed as follow.
Press [F7] key for Boot Menu.