23
ENG
Connected Services
Features
Traffic
The current traffic/road event information is
basically displayed on the traffic information list.
This feature may not be supported depending on
condition.
1. Press [ ] > [Traffic].
•
It is displayed only when there is traffic
information along route after a route is set.
•
The total delay time will be displayed on
title. This can be different from sum of
each delay times due to rounding-off.
2. Press the desired items.
•
[Previous]/[Next]: Toggles through
different traffic events.
•
[Show on map]: Displays map screen for
selected area.
•
[Recalculate]: Recalculates the route by
reflecting traffic information.
Live POI (Points of interest)
You can set a POI as destination using different
search methods.
Searching for POI by [Near current
position] or [Near destination]
1. Press [ ] > [Live POI].
2. Press [Near current position] or [Near
destination].
•
[Near current position]: Searches POI near
current vehicle position.
•
[Near destination]: Searches POI near
selected destination.
3. Enter the desired POI (Points of interest)
name and press [OK].
4. Select the desired destination.
5. Follow the steps 3-4 of the “Address
Search” on page 13.
Searching for POI by [Near city centre]
1. Press [ ] > [Live POI] > [Near city centre].
2. Enter the desired city name and press [OK].
3. Enter the desired POI (Points of interest)
name and press [OK].
1 MAPM6720EAE.AEU1H1 (AE EV) QRG ENG 0000.indd 23
2018-01-25 3:11:32